44
Filling the cooling system (engine cold) with an electronic filling system
To fill the cooling system when the engine is cold, open the quick
release coupling and connect the electronic filling system.
•
Switch on the pump and fill the cooling system with the cooling fluid
valve open.
•
Leave the filling system connected and allow the cooling fluid to
circulate through the system to ensure that the cooling system is
pre-bled sufficiently.
•
Afterwards disconnect the filling system and warm the engine up. If
the system level drops, top up the system to the ‘max’ mark on the
expansion tank by connecting the pressure bottle to the closed
system.
•
Additional information about the electric filling system can be found
in the Sobek Technical Information.
911 GT3 Cup (Type 997) cooling system
