12
Re-setting the throttle
Re-setting the throttle is always necessary if the ECU or the throttle
sensor were changed or replaced.
•
Disconnect throttle cable
•
Rotate the knurled screw (idle adjustment screw) anti-clockwise
till a gap is visible between the cam-disc and the idle adjustment
screw (throttle completely closed).
•
select warm up mode in Motec display
•
press both menu button for 3 sec
•
the Display show you “RESET” and 0,0
•
Open throttle 6,5% with the idle adjustement screw (refer to
Motec display).
•
Lock idle adjustment screw
•
Connect throttle cable
•
heck full throttle (refer to Motec display 100%
idle adjusting srew
press both menu
button for 3 sec.
the Display show you
“RESET” and 0,0
