20
Using the web application
EN
PLC connection to vehicle
This function is only visible to and configurable by the
Customer service
user. If the PLC connection is
disabled, no more data is transferred to the vehicle
via the cable.
This mode is required during certain measurements,
for example.
When data transfer is active, charging uses the
charging protocol (high-level communication) as
standard.
When data transfer is disabled, charging is based on
electrical parameters (pulse width modulation).
Adding an energy manager
For charging control to be assumed by the energy
manager, first the charger (EEBus device) and the
energy manager must be connected to one another.
Connection can be established both in the web
application of the energy manager and the web
application of the charger (or directly on the charger).
Establishing a connection to the charger on the
energy manager
f
The procedure for establishing the connection to
the charger is described in the chapter “Adding an
EEBus device” in the web application instructions
for the Porsche Home Energy Manager.
Establishing a connection to the energy manager on
the charger
b
The charger and energy manager are in the same
network.
1.
In the charger web application, navigate to
Connections > Energy manager
.
The energy manager is shown in the
Available
energy managers
list.
2.
Select and expand the energy manager.
3.
Select
Pair device
.
The connection is checked.
4.
In the
Establish connection
dialogue box, check
the identity of the energy manager using the ID
number (SKI) once more, then select
Connect
.
The energy manager is successfully connected
and the status
Energy manager connected
is
displayed.
The energy manager settings, e.g. information on
the charging current, overload protection and
optimised loading, as well as tariff settings,
are applied to the charger.
Disconnecting from the energy manager:
1.
In the charger web application, navigate to
Connections > Energy manager
.
The connected energy manager is shown with the
status
Energy manager connected
.
2.
Select
Disconnect
.
The connection between the energy manager and
the charger is disconnected.
Linking user profiles
In your Porsche ID account, you can also retrieve
information on charging processes. To do this, the
charger must be linked to a Porsche ID.
1.
Press the
Link user profile
button.
The
Link user profile
dialogue box opens.
2.
Select the appropriate option, depending on
whether there is an Internet connection:
3.
On the Porsche ID account website, enter your
login data (Porsche ID, password).
Settings
System
Demo mode
This setting is only visible to the
Customer service
user. In demo mode, the charger's functions can be
conveniently displayed and a charging process
simulated. Settings made in demo mode are not
applied.
b
The
Customer service
user is logged in.
e
Enable the function.
Next time you log into the web application, demo
mode will be activated again.
Changing a password
You can change the login password for the web
application. The new, chosen password overwrites
the initial password from the letter containing access
data.
e
Select
Change
and enter a new password.
Information
To transfer data to your Porsche ID account, the
charger must be connected to the Internet.
Option
Explanation
To My
Porsche
b
Web application is connected to
the Internet.
e
You will be redirected straight to
your Porsche ID account.
More
options
b
Web application is not connected
to the Internet.
e
If your mobile device has an
Internet connection, either scan
the displayed QR code or enter the
displayed URL manually in your
browser.
