ENGLISH
77
Copy factory parameters from the Hot Key to the device memory
•
The device must be switched on.
•
Remove the four plastic plugs from the cover, unscrew the screws, and remove the cover.
Note!
Beware of live connectors.
•
Install the programming stick (A) in the Hot Key connector on the controller. The programming
stick cannot be inserted the wrong way round.
•
Press the
key for three seconds to display “HA”.
•
Use the arrow keys
and
to find the parameter “doL”.
•
Press the
button until “doL” starts flashing. The parameters are copied from the stick
to the device memory. Finally, the text “End” appears on the display. Allow the text to turn off
before removing the programming stick.
•
Replace the cover.
Note!
If the controller and programming stick are not compatible, “Err” will be displayed.
A
A
MED SAVE XW757K
Summary of Contents for FESTIVO MED XW70L
