Porkka Bar 550, Installation And Operation Manual

Page: 7 / 36

202109
7
Removal of runners
Draw the rail out completely and turn it in the direction of the
arrow.
At the same time, pull the rail upwards so that the
foremost attachment of the rail comes off from the
groove in the wall of the product.
Draw the rail directly out so that the rearmost attachment of the
rail comes off from the groove in the wall of the product.
Put the rail back in reverse order. If the rail has been installed
correctly it does not come off when lifted.
REMOVAL OF DRAWERS AND TELESCOPIC
RUNNERS
Removal of a drawer
Open the drawer for about 5-10 cm and pull firmly at the lower
level of the front series using both hands so that the front part
of the drawer becomes loose from the rails. Do not pull using
the handle!
Open the drawer completely and pull the rear of the box loose
from the rails.
Put the box back in reverse order. Make sure that the drawer is
at the bottom of the attachments of the rails.
COOLING UNIT
Removal of the unit for cleaning or servicing
Switch off cabinet by pressing
standby button and remove
socket.
Remove the grating (1). Lift it
straight upwards and draw the
lower edge outwards when
the grating will come off.
Switch off power supply by
removing socket. Also remove
the socket for shelf cooling
and for light (2).
Loosen 2 screws on the lower
edge of the unit (3).
Pull the cooling unit out.
Replace by reversing
procedure.
Operators / user’s responsibility
Clean the condenser filter on
the cooling unit (4) two times
a month or when necessary.
Remove the filter and rinse
under running water.
Shake off excess water and
replace filter.
Clean the finned condenser on the unit (5) once a month using
a soft brush and / or vacuum cleaner. Take care not to
damage fins.
If the cabinet is situated in a very dusty environment, i.e.
bakery, it has to be cleaned more often.
The cooling unit should be removed and serviced by
a professional company 1-2 times per year.
ENGLISH