Pop ProSet PB2500, Service Manual, Page: 6 / 37

5
• Do not modify the tool in any way. Any modification to the tool is undertaken by the customer and will be the customer’s
entire responsibility and void any applicable warranties.
•
Disconnect the battery from the tool before performing any maintenance, attempting to adjust, fit or remove a nose
assembly.
• Prior to use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the
tool’s operation. If damaged, have the tool serviced before using. Remove any adjusting key or wrench before use.
• Prior to use, inspect battery for damage. Do not drop battery. A sharp impact may cause internal damage and lead to
premature battery failure.
• Keep work area clean and well lit.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
• Adopt a firm footing or a stable position before operating the tool.
•
Operators and others in work area must wear ANSI Z87.1 CAN/CSA Z94.3 approved safety glasses with side shields. Always
wear safety glasses and ear protection during operation.
• Adequate clearance is required for the tool operator’s hands before proceeding.
• Do not operate a tool that is directed towards any person(s).
• DO NOT operate tool with the nose housing removed.
• Do not operate the tool or the charger in an explosive atmosphere or environment allowing exposure to combustible fluids
or gasses.
•
Do not operate the tool or the charger in an environment allowing exposure to moisture or rain to avoid risk of electric
shock.
• Do not abuse the tool by dropping or using it as a hammer.
• Keep dirt and foreign matter out of the air vents of the tool as this will cause the tool to malfunction.
• Keep tool handles dry, clean, and free from oil and grease.
• When carrying the tool from place to place keep hands away from the trigger to avoid inadvertent activation.
•
Never leave operating tool unattended.
•
Disconnect battery when tool is not in use.
1.3. IMPORTANT SAFETY INSTRUCTIONS FOR ALL BATTERY CHARGERS
SAVE THESE INSTRUCTIONS
: This manual contains important safety and operating instructions for compatible battery chargers
(refer to Technical Data).
• Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery
pack.
WARNING
: Shock hazard. Do not allow any liquid to get inside charger. Electric shock may result.
WARNING : We recommend the use of a residual current device with a residual current rating of 30mA or less.
CAUTION : Burn hazard. To reduce the risk of injury, charge only DEWALT®/POP®Avdel® rechargeable batteries. Other
types of batteries may burst causing personal injury and damage.
CAUTION : Children should be supervised to ensure that they do not play with the appliance.