Pop ProSet PB2500, Service Manual, Page: 25 / 37

24
9. Operation Test and Appearance check
Operation Check
Set 20 rivets of 4.8mm(3/16”) SSD-6*-BS and 10
rivets of 4.8mm(3/16”) AD-6*-ABS to check
followings:

The tool does not slip

Rivet setting is done in one stroke

There is no protruding mandrels

There is no abnormal noise

The next rivet introduced to the front of the tool
is inserted smoothly.

The jaws do not bite

The waste mandrel is ejected to the Collector

The collector shutter operates normally
(Open → Close)
Appearance check

Any scratches on the housings

Loose components and screws

Any oil spots on the housings

Peeling of the outer mold (Rubber grip)
Memo