LOADING AND UNLOADING
SECTION SIX
| TRANSPORT INSTRUCTIONS
When loading or unloading the
POP-UP PUSH 6 ECO, use one of the methods shown.
FORKLIFT
TAIL LIFT
When using a forklift to lift the POP-UP PUSH 6 ECO, ensure the forks are sufficiently inserted into the
forklift pockets in the base of the machine. Please see the location of the forklift pockets below.
When using a tail lift to load or unload the POP-UP PUSH 6 ECO ensure that brakes are applied to both
castors. Ensure that the capacity of the tail lift is sufficient to handle the POP-UP PUSH 6 ECO. Take care
when manoeuvring the machine on the tail lift.
When winching the machine onto or off a vehicle, ensure that the winch is connected to the winch point
as shown below. Ensure personnel are available to guide the machine whilst the winch is in operation.
WARNING:
NEVER ATTEMPT TO LOAD OR UNLOAD THE
POP-UP PUSH 6 ECO
BY MANUAL
EFFORT ONLY, SERIOUS INJURY, MACHINE OR PROPERTY DAMAGE COULD RESULT
Page 19 of 23
POP-UP PUSH 6 ECO OPERATOR’S SAFETY AND MAINTENANCE HANDBOOK (v.0.4.0409)
FORK LIFT POCKET
WINCH POINT
