PERIODICAL MAINTENANCE AND CHECKS
(CONT.)
SECTION FIVE
| MAINTENANCE
Prior to first use of the POP-UP PUSH 6 ECO, all daily/pre-use checks must be undertaken. If the machine has
been in storage for a long period of time, it may be necessary to undertake checks and tests as per the table on
the preceding page (e.g. lubrication, hydraulic oil, battery condition).
The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) require that lifting equipment for lifting
persons must be THOROUGHLY EXAMINED every six months.
Following any maintenance on the POP-UP PUSH 6 ECO, a full function test should be undertaken to ensure
correct operation of the machine.
It is essential that only manufacturer’s approved replacement parts are used when maintaining and servicing the
POP-UP PUSH 6 ECO.
Failure to do so may result in an unsafe or unstable machine.
STORAGE
The electrical components of this POP-UP PUSH 6 ECO are not protected from external weather conditions
and the machine should therefore not be stored outdoors. Storage in a clean, dry indoor environment is
recommended.
Frequent checks on the condition of the machine should be made to ensure no excessive deterioration occurs
due to the environment in which the machine is housed.
LUBRICATION
The required lubrication points are listed as per the table on the preceding page. These include: roller guides,
grease nipples, pivot pins and castor mounts.
The lubricant recommended for use with this POP-UP PUSH 6 ECO is: standard machine grease.
Page 14 of 23
POP-UP PUSH 6 ECO OPERATOR’S SAFETY AND MAINTENANCE HANDBOOK (v.0.4.0409)
