background image

  

  Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list page. 
  Find a clean, level place to begin assembling your Pop-A-Shot game. 
  Like most things in life, putting together your Pop-A-Shot  is better when done with a friend. 

Tip:

   

(we’ll tell you when). 

If you can’t find someone to help for the entire time, at least try to get help at certain times

Storage: The Outdoor Dual Shot is built for outdoor use but is not designed for use in extreme

(hot or cold) conditions. Avoid excessive moisture by moving the game to a covered space or

covering with the Outdoor Dual Shot Cover (sold seperately). 

   

Read all instructions:

 

All the safety and operating instructions should be read carefully before this

product is operated or played. 
Caution:

 

This is not a toy and is intended for use by or under the supervision of adults. Adults should 

review safety guidelines with children to avoid possible risk of electric shock or other injuries. 
Recommend:

 

The game should be periodically examined for conditions that may result in the risk of fire,

electrical shock or injury to persons. In the event such conditions exist, the game should not be used 
until properly repaired. 

 

 

 

Tip:

 Before putting your game together, please visit our Support Page at www.pop-a-shot.net/support 

  There you’ll find more hints and hacks to help you put together your new game, as well as assembly videos. 
  We hope you love your Pop-A-Shot Home Dual Shot and will let your friends and family (and any review sites) 
  know how you feel. If you do have a problem (and it happens), please let us know first and give us a chance to fix it. 
   

E:

 [email protected]

Required
    Phillips Head Screwdriver (Not included)
    Flat Head Screwdriver (Not included)
    Allen Wrench (Included)
    Wrench (Included)
    4 AA Batteries (Not included)

Recommended (but not required)
    Electric Screwdriver 
      Tip: Make sure to set the tool to a very 
          low torque to prevent damage to the game.
    Socket Wrench Set
    Level

SKU# PASOUT19-02

WWW.POP-A-SHOT.NET           

Pop-A-Shot Outdoor | Dual Shot                                 Page 2/16

Tip: The included tools will certainly do the job,

but you probably have better tools of your own.  

Summary of Contents for OUTDOOR I DUAL SHOT

















Reviews: