Slide the Lean Bar (#9) through the sleeve of the
Ball Return Ramp.
Then attach the Lean Bar to the Ramp
Tubes (#8) using the Spring Locks (Fig 14A).
6
26
29
30
29
Attach a Cross Tube (#6) across the Ball Return Ramp (#18)
to the Lean Bar (#9) using a Bolt (#26), two Washers (#29)
and a Nut (#30) (Fig. 15A). Pull the straps around the Lean bar
and snap it into the buckle (Fig. 15B). If neccesary, wrap the
straps around the bar before buckling.
Fig. 15A
Fig. 15B
STEP 14
STEP 15
SKU# PASOUT19-02
WWW.POP-A-SHOT.NET
Pop-A-Shot Outdoor | Dual Shot Page 11/16
Fig 14A