2
1 . Safety Instructions
..................................................................................................3
2. Pump Overview
.........................................................................................................4
3. Water chemistry...........................................................................................................5
3.1 Ideal chemical level...........................................................................................5
4. Installation ...............................................................................................................6
4.1 Installing the control Module ................................................................................7
4.2 Adding salt .......................................................................................................10
4.3 Salt levels ......................................................................................................10
5. Installation checklist ..............................................................................................12
5.1 How it works ...................................................................................................12
5.2 Initial Start up..................................................................................................12
5.3 Operation.......................................................................................................13
5.4 Automatic coverage detector (optional) ........................................................14
5.5 Control Module..............................................................................................14
6. Led Indicator light
..................................................................................................16
6.1 General maintenance....................................................................................17
6.2 Maintaining the Electrolytic Cell ........................................................................17
6.3 To clean the Cell of mineral buildup .................................................................18
6.4 Winterizing .....................................................................................................18
7. Voltage coneversion .............................................................................................19
8. Helpfull hints ..........................................................................................................20
9. Troubleshooting
..................................................................................................21
10. Warranty..................................................................................................................23
TABLE OF CONTENTS
Electrical specifications: 230V - 50Hz - 2.4A - Double insulation.
Fuse characteristics:
• Supply board: 2AL 250V - Dimensions: 5x20
Environment conditions:
• Indoor use only
• Altitude up to 2000m
• Temperature from 5 to 40°C
• Maximum relative humidity 80% for T < 31°C, with linear decrease down to 50% of
relative humidity at 40°C
• Variations of mains supply network voltage must not /-10% of nominal
voltage.
• Occurrence of transitory overvoltage on mains supply is normal.
