poolstar PC-SKY075, Installation And User Manual

Page: 105 / 144

18
H. Trouble shooting for common faults
1. Repairing Guidance
-----------------------------------------------------------------------------------------------------------------------------------------
WARNING:
a. If repair or scrap is required, pls contact authorized service center nearby.
b. Requirements for Service Personnel
c. Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid
certificate from an industry-accredited assessment authority, which authorizes their competence to handle
refrigerants safely in accordance with an industry recognized assessment specification.
d. Do not attempt to work on the equipment by yourself. Improper operation may cause danger.
e. Strictly comply with the manufacturer's requirements when charging R32 gas and equipment maintenance.
This chapter focuses on special maintenance requirements for swimming pool heat pump with R32 gas.
Please refer to the technical service manual for detailed maintenance operation.
f. Vacuumize completely before welding. Welding can only be carried out by professional personnel in service
center.
2. Failure solution and code
----------------------------------------------------------------------------------------------------------------------------------------
Failure Reason Solution
Heat pump doesn’t run
No power Wait until the power recovers
Power switch is off Switch on the power
Fuse burned Check and change the fuse
The breaker is off Check and turn on the breaker
Fan running but with insufficient
heating
evaporator blocked Remove the obstacles
Air outlet blocked Remove the obstacles
3 minutes start delay Wait patiently
Display normal, but no heating
Set temp. too low Set proper heating temp.
3 minutes start delay Wait patiently
If above solutions don’t work, please contact your installer with detailed information and your model number.
Don’t try to repair it yourself.
Note:
If the following conditions happen, please stop the machine immediately, and cut off the power supply
immediately, then contact your dealer:
1. Inaccurate switch action.
2. The fuse is frequently broken, or leakage circuit breaker jumped.