Poolspa VICTORIA SPA, Installation And User Manual

Page: 20 / 28

20
1765 1580
660 600
440
Skimerofiltr
230 V (3 x 2 , 5 mm )
electric connection
with 5 kW efficiency , protected
by a circuit breaker
(30 mA cut-off value)
2
Sewage connection
50 mm
Water connection 1/2”
for water filling
Fig. 2-8. Location of SPA Victoria connections
2.8. Maintenance of acrylic elements
Only mild fl uids (not containing acetone, abrasive or
caustic substances) should be used to clean the bath.
The structure and low level of surface adhesion of ac-
rylic mean that keeping the bath clean should not be
a problem.
Mechanically damaged gloss acrylic (small, shallow
scratches) can be easily repaired. In the case of small
scratches, a small amount of wax-free car-polish sho-
uld be used. Deeper scratches may be removed by
sandpaper in order of grain 800, 1200, 2000 followed
by the car-polish mentioned earlier. In order for the
surface to be smooth it should be ground in a circular
motion, followed by a wax car polish (which provides a
high level of shine). Repairs can be made with a repa-
ir kit available at the dealer shops;
however we re-
commend using the services of our authorized
POOL-SPA service staff.
Fig. 2-9. The repair kit for SPA baths