Poolspa VICTORIA SPA, Installation And User Manual

Page: 14 / 28

14
Underwater lighting must not be used when there is no water in the bath!!!
Underwater lighting must be switched off before water is drained from the bath !!!
SPA Victoria Filtration System:
The system is composed of the following elements:
• skimmer
fi lter,
• water pump,
• pipe system with a suction point,
• pipe system with water jets,
• ozonizer,
• injektor.
Skimmer filter
Water pump
Suck
Ozonizer
Injektor
Ozone
jet
Ozone
Water
Water + ozone
The skimmer fi lter used in the SPA Victoria has the fi ltration area of 1.86 m 2 and the fl ow capacity of
approximately 19 m 3 /h.
Filter insert replacement :
1.
Tilt the hatch towards the inside of the bath
2. Remove element B and subsequently element C
3. Remove element D and subsequently element E
4. clean or replace fi lter inserts D and E
5. install new fi lters in the opposite order – i.e. E and D
6. Install elements C and B
7. cleaning relies on rinsing of the insert with warm running water.
Fig. 1-8. Skimmer fi lter used
for SPA Victoria
It is recommended to clean fi lter inserts every 2 days
and replace inserts not less frequently than once a
year.
The water pump operating in the fi ltration mode has effi ciency at
the level of approximately 10 m
3
/h, while operating in the hydro-
massage mode – at the level of approximately 20 m 3 /h. The suction
point used for SPA Victoria has the effi ciency of approximately 42,7
m
3
/h and has a special anti-adhesive structure ensuring safety of
operation of the bath.
Fig. 1-9. Suck used for SPA Victoria
Fig. 1-7. Filtration system scheme for a SPA Victoria Fig. 1-7. Filtration system scheme for a SPA Victoria