Poolspa VICTORIA SPA, Installation And User Manual

Page: 13 / 28

13
1.6.2. Airmassage (pearl bath)
In airmassage, heated air is pumped into water by a blower. Millions of bubbles come from the
perforated bath bottom, actively massaging the body. The bubbles stimulate the circulatory system,
relax muscles and joints. Their activity may be compared to a normal hand massage. It soothes the
nervous and respiratory system, and improves metabolism.
The airmassage system is made of the following elements:
- properly situated air channels, forming an integral part of the bath, topped with a number of
openings within the water section of the bath,
- a blower with a suction noise silencer,
- a loop protecting against water intrusion into the blower.
1.7. Water ozonizing
Oxygen (O )
2
Ozone (O )
3
O
1
O
3
O
2
Oxygen atoms
Electric
current
or UV light
The ozonized air has, apart from a nice scent, many
therapeutic and antiseptic properties. It greatly helps in
keeping the water clean both in the bath and the plant.
Ozone defi nitely supports maintenance hygiene in the
SPA. The heated and ozonized air is pumped into the air
duct system underneath the bath. Operating only during
fi ltration.
Fig. 1-5. Ozone producing process
Caution : ozoning does not occur during hydromassage!
Ozone is healthy:
- it is more and more popular in beauty treatment,
- helps to remove stretch marks, cellulite and wrinkles,
- improves complexion,
- helps to treat varicose veins and skin diseases,
- helps in heart and circulatory system problems,
- soothes problems connected with menopause.
Why is ozone necessary in SPA?
- it has antiseptic properties,
- helps to keep the bath clean,
- helps to keep water clean, fresh and clear,
- eliminates any unpleasant water smell,
- eliminates fungi and yeast in water,
- refi lling with water does not need to be frequent.
1.8. Lighting
There are attached to under water ligth two coloured overlays made
from plastic in two colours: red and blue (see pict. 1-6). Put it on light
cover in inner part of SPA. To remove overlay use screwdriver with fl at
end - discuter edge of overlay to slide out of light cover.
Fig. 1-6. Coloured overlays for under-
water light