13
1.5.5. SPA BEHAVIOR!
Pumps
On the Spa Screen, select a “Jets” button once to turn the pump on or off, and to shift between low- and high-
speeds if equipped. If left running, the pump will turn off after a time-out period. The pump 1 low-speed will
time out after 30 minutes. The high-speed will time-out after 15 minutes.
On non-circ systems, the low-speed of pump 1 runs when the blower or any other pump is on. If the spa
is in Ready Mode, Pump 1 low may also activate for at least 1 minute every 30 minutes to detect the
spa temperature (polling) and then to heat to the set temperature if needed. When the low-speed turns on
automatically, it cannot be deactivated from the panel, however the high speed may be started.
1.5.6. TIME-OF-DAY
Be sure to set the Time-of-Day
Setting the time-of-day is important for determining filtration times and other background features.
“Set Time” will appear on the display if no time-of-day is set in the memory.
On the Settings Screen, select the Time-of-Day line. On the Time-of-Day screen, simply navigate right and
left to select the Hour, Minutes, AM/PM and 12/24 Hour segments. Use the Up and Down Buttons to make
changes.
Time of Day
Back
12
: 00 PM
12 HR
Saving Settings
The Time-of-Day screen is a simple, editable screen that illustrates a feature of the control that applies to all
other editable screens as well.
When changes are made, the icon to go “Back” changes to “Save” and a new icon for “Cancel” appears under
the Save icon. Navigating to the left will highlight the Save icon, and navigating down from there will allow
the user to cancel the pending change. Pressing the “Select” button will save or cancel the changes and go
back to the previous screen.
Time of Day
Back
12
: 00 PM
12 HR
Cancel
Save
10:
05
PM
12 HR
Note:
If power is interrupted to the system, Time-of-Day will be maintained for several days.
Summary of Contents for Laguna SPA
Page 1: ...SPA Bath LAGUNA SPA 213 x 213 Installation and user manual...
Page 40: ...40...
Page 42: ...42...