5
- lock bathtub legs with locking nuts
- enclose the bathtub, ensuring access of fresh air to bathtub devices (area equal to 2 standard ventilation grates) and
space for removing drain tap when it needs to be cleaned
- seal the gap between the bathtub and surrounding walls using masking strip or sanitary silicone.
14. INSTALLING PANEL ENCLOSURE
Panel bathtub enclosures were designed to ensure the access of air to devices under the bathtub.
Their height was measured as to create a ca. 3 mm gap under the enclosure after installation.
When installing manufacturer’s suggested enclosures:
- set enclosure spacer screws located in the aluminum bathtub frame
- attach pressure springs to holes in the bottom part of bathtub enclosure
- place the enclosure with compression springs near the bathtub
- attach free spring ends to holes in the bottom part of aluminum bathtub frame
- place the upper rib of bathtub enclosure in the gap between bathtub edge and limiters.
Panel bathtub enclosures with simpli
fi
ed frame are equipped with laminated aluminum
fl
ats, to which you should screw
the legs that set the height and support the enclosure.
A
B
1
2
1
1 - panel
2 - bathtub
Detail A
1
2
Detail B
1/3
2/3
2/3
