background image

WARRANTY CARD

EQUIPMENT

EQUIPMENT

T

Name of Purchaser

Address

Purchased From

Date

Equipment and Model

IMPORTANT:

 

This card must be fi lled in and returned to 
Poolrite Equipment Pty. Limited within 14 days 
of purchase to render the Warranty effective.

AUSTRALIA

QUEENSLAND HEAD OFFICE
SALES & EXPORT BRISBANE

415 Creek Road, MT GRAVATT QLD 4122
PO Box 520, MT GRAVATT QLD 4122
Telephone: (07) 3323 6555  Facsimile: (07) 3323 6500

NEW ZEALAND

POOLRITE EQUIPMENT PTY LTD

22/761 Great South Road,
Penrose AUCKLAND New Zealand
Telephone: (09) 571 0210  Facsimile: 0800 766 574

WARRANTY CARD

WATER MIZER FILTRATION SYSTEM

POOLRITE EQUIPMENT PTY. LTD.

Your POOLRITE Filtration Equipment is manufactured to the 
highest possible standards and most up-to-date technology. 
Accordingly the equipment carries the following warranty, 
should a fault occur due to faulty manufacture or materials.

IMPORTANT:

In the event a fault covered by warranty occurs, the Purchaser 
must in the fi rst instance contact 

POOLRITE EQUIPMENT PTY. 

LTD.

 or the closest authorised Poolrite Distributor.

 

1.

   All components in the Filtration System, except the 

fi lter tank and pump, carry 1 year (12 months) 
warranty from the 

DATE OF PURCHASE BY THE 

ORIGINAL OWNER

.

 

2.

   Due to POOLRITE’s Advanced Moulding Technology, 

the Filter Tank (the most important part of your 
Filtration System) carries a special Extended Warranty 
of ten years from the Date of Purchase by the 
Original Owner. The terms of this Warranty cover 
full replacement, excluding the cost of labour, of a 
defective Filter Tank for the Original Owner for a 
period of fi ve years (60 months) from the Date of 
Purchase by the Original Owner and additionally 
for a further fi ve years (60 months) the Filter Tank 
will be replaced for the Original Owner at a pro-
rata cost.

 

3.

   Pump Warranty (ENDURO and SQI 500) – 

In addition to the conditions of sale and warranties 
implied at law and which may not be excluded, 
POOLRITE warrants the pump to be free from defect 
for a period of two (2) years and the Mechanical 
Seal for a period of one (1) year from the date 
of purchase by the Owner from POOLRITE or an 
authorised supplier of the pump.

   

 POOLRITE will repair, or authorise a qualifi ed 
technician to repair, the pump provided that:

   

•  POOLRITE is notifi ed within seven (7) days of the 

defect being detected;

   

•  The pump is not operated subsequent to detection 

of the defect;

   

•  The pump has not under gone any unauthorised 

modifi cation or been fi tted with other than 
genuine POOLRITE approved parts; and

   

•  The pump has been installed and operated 

in accordance with the Installation Instructions 
and Operating Instructions, respectively.

   

 POOLRITE will not be liable to repair the pump 
if the repair is necessary because of misuse, 
accidental damage, entry of foreign objects 

or materials into the equipment, improper or 
inadequate maintenance or repair or incorrect 
operation of the pump.

   

 This warranty does not extend to reasonable wear 
and tear of the pump.

   

 All repairs must be undertaken by POOLRITE or a 
technician authorised by POOLRITE.

   

 The owner will be responsible for all freight 
and/or travelling charges. POOLRITE accepts no 
responsibility for goods while in transit.

   

 POOLRITE accepts no responsibility for 
representations other than expressly contained in 
literature published by POOLRITE. In particular 
POOLRITE has made no representation as to the 
fi tness of the pump for any particular purpose 
except as contained in such literature.

 

4.

   The Warranty is void if the following are not adhered to:

   

(a)

  The equipment must be installed and used in 

accordance with the instructions supplied.

   

(b)

  The equipment is designed to be used in swimming 

pool water, balanced in accordance with the 
langlier Saturation Index with a pH of 6.8 to 
8.0 and that is regularly treated with a sanitising 
system utilising chlorine either added in compound 
form or generated in situ in concentrations 
as recommended by the relative State Health 
Departments. Should other chemical treatment 
systems or parameters be used, POOLRITE will not 
be responsible for damage done by corrosion, 
scaling or stress cracking of equipment or for 
shortened fi lter cycles resulting therefrom.

   

(c)

  The Pressure Gauge will not be covered by 

Warranty if damaged by water, if the gauge cover 
is not fi rmly affi xed.

   

(d)

  If in the opinion of POOLRITE the equipment has 

been subjected to other than normal pool use, or 
improperly serviced/maintained, the Warranty will 
be void.

The Warranty is applicable to workmanship and materials only. 
POOLRITE will replace at no charge, all parts returned freight 
paid, which display faulty workmanship or materials. POOLRITE 
EQUIPMENT PTY. LTD. accepts no responsibility for loss, 
damage or injury to person or property arising from Warranty 
failure of equipment, or installation of that equipment.

Unless with the express prior authority of POOLRITE any 
repair or replacement shall be provided only by POOLRITE or 
its Authorised Distributors and this Warranty shall not extend 
to any expenditure otherwise incurred.

Summary of Contents for 130 - Enduro












Reviews: