Water Mizer Filtration
System 130 & 240
FILTER CARTON 130 & 240 CONTAINS:
• A factory assembled Filter ready for immediate
installation.
• Enduro or SQI 500 Pump.
• Moulded Base Plate.
• Moulded Plumbing from Pump to Filter completely
assembled.
• Hair and Lint Pot and basket.
• Owners Manual & Warranty Card.
ASSEMBLY INSTRUCTIONS:
ENDURO PUMP MODEL ONLY
Before plumbing in the filter, the hair and lint pot and basket
must be assembled as shown in the pictures below.
ENSURE RETAINING SCREWS ARE FITTED
INSTALLATION
Water Mizer 130 & 240
1.
The Filter is normally packed in the carton fitted to the
mounting base, however, should these be separated,
the Filter Tank is fitted to the Mounting Base by tilting
the tank forward at an acute angle allowing the R.T.P.
Plumbing outlet at the bottom of the tank to slide
through the hole provided in the Mounting Base.
2.
Position the slot in the Filter Tank Base into the Keyway
in the Base Plate well.
2
3
1
2
3
4
IMPORTANT
Ensure O-Ring is
in position.
ASSEMBLY INSTRUCTIONS:
SQI 500 PUMP MODEL ONLY
Before plumbing in the filter, the pump (packaged separately)
must be bolted to the base plate (photos 2 & 3). Two bolts,
nuts and washers supplied.
Attach plumbing arm to filter tank and pump, ensuring the
rubber O-rings provided are used (photo 4).
1
2
3
4
Summary of Contents for 130 - Enduro
Page 2: ...EQUIPMENT T ...