6
2.4.
Keypad
COMMAND KEY
(depending on
the model)
FUNCTION
MENU
•
Switch on the electronics unit.
→
30 minutes* after switching on, chlorine dosing and pH regulation start automatically,
provided that these functions are not disabled, and certain alarms have not been activated.
*
Time required to polarise the amperometric probe.
•
Switching off the electronics unit
(press and hold)
, provided that no alarm or alert is
activated.
→
When switching it off, the screen and the green LED turn off, and the red LED comes on.
•
Access the menus.
BOOST
Direct access via
the ‘
Dosing - Manual Injection
’ menu
(
see chapter 2.6.1
.
T°C
None.
SALT
None.
pH
Direct access to the ‘
pH Regulation
–
Calibration
’
menu (press and hold)
.
Select a value or data item.
•
Cancel a command.
•
Back to the previous (sub)menu.
•
Acknowledge an alarm or alert.
OK
•
Command confirmation.
•
Enter a (sub-)menu.
•
Acknowledge an alarm or alert.
