4
2.
ELECTRONICS UNIT
2.1. Interface
ELEMENT
STATUS
MEANING
Red LED
Continuously on
Electronics unit powered off
Flashing
Alarm activated
Green LED
Continuously on
Production in progress
Screen
Default display
Production setpoint
Flashing display
Information awaiting validation, or alarm
Frozen display
Confirmed information
2.2.
Switching on
When connecting the electronics unit to a power supply :
After about a minute, production starts automatically, according to the setpoint displayed on the screen.
If the electronics unit is powered off (screen off, red LED on) :
Press at least twice on the upper control key. After about a minute, production starts automatically, according to
the setpoint displayed on the screen.
2.3.
Switching off
Set the production setpoint to
00
using the top key
(no confirmation required)
: after a few seconds, the screen turns
off and the red LED comes on.
The internal ventilator of the electronics unit can may be able to continue running as long as the unit is powered on.
2.4.
Adjustment of the inversion frequency of the current supplying the cell
(optional)
I
Reversing the flow aims to prevent scale deposits on the cell. The frequency at which flow is reversed must be
correctly set following the table below in order to ensure that the cell continues to operate correctly in the long term.
Possible settings : 02
,
04
,
06
,
08
,
10
,
12
,
14
,
16
(hours)
.
Default setting : 04
.
Water hardness (°f)
0 to 2
2 to 5
5 to 8
8 to 12
12 to 20
20 to 40
40 to 60
> 60
Water hardness (mg/L)
0 to 20
20 to 50
50 to 80 80 to 120 120 to 200 200 to 400 400 to 600
> 600
Reversal frequency (h)
16
14
12
10
8
6
4
2
1)
Press and hold down the bottom key, until the message
In
is displayed.
2)
Press the bottom key : the current setting flashes.
3)
Select an inversion frequency using the top key.
4)
Confirm with the bottom key : the display freezes for a moment.
4
3
1
2
1 :
Red LED
2 :
Green LED
3 :
Screen
4 :
Control keys
Non-binding image
Summary of Contents for ELLY20NPSB-G0HX16
Page 20: ......
