5
2.3.2.
Default display
Possible
settings
menu
Overview
Meaning
In-line
pH measurement
automatic pH
corrector injection is in progress.
Dashboard
pH measurement
only displayed when automatic pH
corrector injection is in progress.
Measures the water temperature
2.4.
Keypad
COMMAND KEY
(depending on
the model)
FUNCTION
MENU
Switch on the electronics unit.
A few minutes after switching on, pH regulation starts automatically, provided that it is
not disabled, and certain alarms have not been activated.
Switch off the electronics unit
(press and hold)
.
Condition:
-
No alarm triggered.
-
No alert triggered.
-
No navigation in the menus in progress.
-
No pH corrector injection in progress.
When switching it off, the screen and the green LED turn off, and the red LED comes on.
Access the menus.
BOOST
None.
T°C
Water temperature display for a few seconds
-line
.
(press and hold)
.
SALT
None.
pH
menu (press and hold)
.
Select a value or data item.
Cancel a command.
Back to the previous (sub)menu.
Acknowledge an alarm or alert
(press or press and hold, depending on the alarm or alert)
.
OK
Command confirmation.
Enter a (sub-)menu.
Acknowledge an alarm or alert
(press or press and hold, depending on the alarm or alert)
.
