9
8.
Pressure Regulator And Hose Weight Application
Turn on the pump
and relax as your
cleaner cleans your
pool.
Too much suction may cause the hose to
compress and restrict water flow, collapse or
the cleaner to stick to the pool bottom or wall.
Too little suction may cause the cleaner to
move slowly or not climb the wall.
Turn the pressure regulator clockwise to
increase the suction and vice versa to reduce
the suction as needed.
The best position of the cleaner in the water is when its mat “
E
” is resting flat
on the pool floor (about 45 degree angle from the main body to the pool floor).
Adjust the hose weight “
G
” location on the hose to control hose buoyancy.
Place the hose weight after the female cuff of the second hose section “
M
”
from the cleaner. If the cleaner leans forward, you can move the hose weight
towards the cleaner. If the cleaner leans backward, you can move the hose
weight further away from the cleaner.
1
2
3
