5
3.
Cleaner Assembly
Place the mat “E” under the cleaner support “A” and make sure the fins are
pointing upwards. Start by inserting the inner edge of the mat into the front
groove of the foot pad “B”. Stretch and insert the mat all around the groove.
The mat should be secured in the groove and free to rotate on the foot pad.
Insert the diaphragm chamber “
C
” into the support “A”. Align the side pins on
diaphragm chamber with the notches on the support “A”, and continue to in-
sert the chamber into the chamber of the support. Follow the arrow direction of
marking “
” to turn the chamber until it stops.
Place the top ring “
D
” on a flat surface with its marking “TOP” facing upward.
Insert either end of hose “
K“
into the central hole of the top ring until its hose
cuff is secured by the tabs. Insert the cuff on top of diaphragm chamber “
C
”
into the end (with top ring) of hose “
K
” as far as it can go. Insert the end of
swivel connector “
F
” as shown into the other end of hose “
K
” as far as it can go.
2
3
1
