Start-up and Operation
•
Do not
add shock in or near the skimmer or into the
POOL FROG
®
Cycler as it could damage equipment, risk
potential explosion or discolor your pool surface.
•
Add a stabilizer or conditioner to
the pool at the beginning of the
season if the stabilizer level is below
20 ppm. This will prevent chlorine
burn off. Follow manufacturer’s
directions carefully.
•
Install a POOL FROG
®
Mineral
Reservoir into the POOL FROG
®
Cycler. (Follow Directions on Page
7.)
REPLACE THE POOL FROG
®
MINERAL RESERVOIR EVERY
6 MONTHS OR AFTER ONE POOL
SEASON WHICHEVER IS
SHORTER.
•
When chlorine reading is down
to 1.0 ppm, which may take a few
days, insert POOL FROG
®
Bac
Pac. (
Follow directions on page
9.)
1.
6.
2.
3.
4.
5.
•
Replace cap and run POOL
FROG
®
Cycler, with
POOL FROG
®
Mineral Reservoir inserted, for 10
minutes on Setting 10.
•
For an Algae Protection
Guarantee insert FROG BAM
®
into POOL
FROG
®
Mineral
Reservoir in POOL FROG
®
Cycler.
(See page 8 for directions.)
•
Shock the pool with chlorine to rid
the water of all contaminants before
beginning with POOL FROG
®
.
Follow
manufacturer's directions carefully.
•
THIS STEP IS VERY IMPORTANT
TO START-UP.
USE CHLORINE SHOCK ONLY.
