background image

Manufactured by: KING TECHNOLOGY, INC.
530 11th Avenue South, Hopkins, MN 55343 U.S.A.
952-933-6118 

 800-222-0169 

 FAX 952-933-2206  www.kingtechnology.com

Made in U.S.A.

Covered by one or more of the following U.S. Patent Numbers: 4,662,387;
5,076,315; 5,218,983; 6,190,547; 6,210,566; 6,217,892; 6,383,507; 6,551,609;
6,652,871; 6,544,415 and other U.S. and Foreign Patents Pending.

20-48-0151E

553100543R2

King Technology, Inc. warrants to the original purchaser this unit
will be free from any defects in workmanship and/or material, for
a period of two (2) years from the date of original purchase. This
warranty covers body, cap and control dial, but specifically excludes
o-rings. King Technology at its option may replace any defective
parts or the entire unit without charge after it is determined what
is needed to correct any deficiency. Replacement parts with the
exception of o-rings are warranted for the remainder of the original
warranty. To extend the limited warranty from two years to ten years,
simply complete the warranty card that came with your unit and
return it to King Technology within 30 days of purchase and
installation.

1. To obtain warranty service, you must deliver the unit to King
Technology or its nearest authorized dealer. Shipping expenses
are the purchaser's responsibility. The name of the nearest authorized
dealer can be obtained by writing or calling King Technology at the
address and telephone number provided below. Proof of purchase
is required when requesting warranty service. Purchaser must
present the sales receipt or other documentation verifying proof of
purchase.

2. This warranty does not cover defects caused by: Modification,
alteration, repair or service of the unit contrary to the accompanying
instructions; physical abuse to or misuse of the product or operation
or installation in a manner contrary to the accompanying instructions.
This warranty also excludes all costs arising from the installation,
adjustment, removal or replacement of defective units or parts. This
warranty also excludes any and all claims arising out of the chemicals
used in the product or their characteristics.

3. CAUTION - Read carefully – Failure to follow these instructions
will void the warranty. Do not add shock in or near skimmer.

A. This unit is not designed for shock treatment of pools. See
your pool dealer or distributor for further information concerning
shock treatments.

16

POOL FROG

®

 Cycler Two-Year Limited Warranty

B. Control dial settings in excess of the recommended setting
levels for trichlor can result in excess sanitizers being discharged
into the pool. This can result in bleaching or discoloration of
areas around the pool inlet or in some cases bleaching or
discoloration of the entire pool liner or paint.

C. Excess trichlor in the pool can create health hazards to
bathers. Consult each chemical manufacturer's warnings and
cautions for specifics.

D. Misuse or failure to use the proper POOL FROG

®

 Mineral

Reservoir and POOL FROG

®

 Bac Pac may cause damage to

equipment or personal injury. This warranty will be null and
void, if this unit is not used with the recommended POOL FROG

®

Mineral Reservoir and POOL FROG

®

 Bac Pac.

4. This warranty is the exclusive warranty for the POOL FROG

®

Cycler. This warranty is not transferable. 

KING TECHNOLOGY

MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
CONCERNING THE POOL FROG

®

 CYCLER.

 Any express warranty

not provided herein, and any remedy for breach of contract but which
for this provision might arise by implication or operation of law is
hereby excluded and disclaimed. THE EXCLUSIVE REMEDY FOR
ANY CUSTOMER IS THE REPAIR OR REPLACEMENT OF THE
UNIT, AND THE RECOVERY OF DAMAGES WILL NOT EXCEED
THE PURCHASE PRICE OF THE UNIT. IN NO EVENT WILL KING
TECHNOLOGY BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
SPECIAL OR PUNITIVE DAMAGES FROM ANY CAUSE.

5. Under no circumstance shall King Technology be liable to purchaser
or any other person for any damage or loss incurred because of any
chemicals used in the product or their physical characteristics, or
interruption of service of the product, or any resulting special,
incidental or consequential damages or losses. Some states do not
allow the exclusion or limitation of incidental consequential damages,
so the above limitation or exclusion may not apply to you.

Summary of Contents for ABOVE GROUND MINERAL SYSTEM FOR POOLS

















Reviews: