Pool Controls Chemigem CM55, User Manual, Page: 5 / 36

Page 3
It is important that the Chemigem CM55 is installed and operated in
accordance with the instructions provided in this manual.
IMPORTANT
If the power cord is damaged the unit must be returned to
Pool Controls for repair.
Always read the instructions and warnings on chemical
containers before using chemicals.
GENERAL WARNINGS:
1. Do not permit children to use this unit unless they are closely supervised at
all times.
2. To reduce the risk of electric shock, replace damaged cord immediately.
3. Do not use extension cord to connect unit to electric supply; provide a
properly located outlet.
4. Ensure all connections from the Chemigem to the electricity supply are made
in accordance with local safety codes.
5. Do not bury any electricity supply cords unless strictly following local safety
codes. Locate all cords, wires and tubes away from places where they may
become damaged by garden equipment.
6. The Chemigem contains microprocessors that may be disturbed by the
operation of electrical devices within a 6-metre radius.
7. The Chemigem must be connected so that it only operates when the pool
pump is running, otherwise incorrect pool water readings will occur and
concentrated chemicals may flow into the pool water pipes and/or the
chemical drums, where they can mix and produce poisonous Chlorine gas.
8. Before operating the Chemigem, bring the pool water chemical levels to
within the ranges given in this manual, but pay attention to the specific
requirements of the pool builder.
9. To ensure the desired chemical levels are being maintained, check the pool
water with a good quality test kit. This should be performed daily for the first
two weeks and on a regular basis thereafter.