Pool Controls Chemigem CM55, User Manual, Page: 3 / 36

Page 1
Manufacturer’s Warranty for
COMMERCIAL INSTALLATIONS
Pool Controls products come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. The
benefits under this warranty are in addition to other rights and remedies under a
law in relation to the goods.
1 YEAR WARRANTY ON COMMERCIAL INSTALLATIONS
Pool Controls warrants its products used in commercial installations to be
free from defects in material and/or workmanship for a period of 1 year from
the original date of purchase.
1 YEAR WARRANTY ON REPLACEMENT PARTS USED IN COMMERCIAL
INSTALLATIONS
Pool Controls warrants its replacement parts used in domestic installations,
including multi- electrodes (probes), solenoid valves and electrolytic cells (but
excluding wearing parts such as tubing and squeeze tubing) to be free from
defects in material and/or workmanship for a period of 1 year following
purchase.
EXCLUSION FOR WEARING PARTS
This warranty does not extend to wearing parts, in particular the squeeze
tubes fitted in peristaltic dosing pumps. Squeeze tubes should be replaced
every THREE months by a suitably qualified technician. Pool Controls is not
liable for any failure of its products or other damage caused by failure of a
squeeze tube that has been used for more than THREE months.
WARRANTY OBLIGATIONS OF POOL CONTROLS
If a defect in workmanship or materials in any Pool Controls product covered
by this warranty is discovered during the term of the warranty, and provided
the warranty holder follows the procedure set out below, Pool Controls will,
at its option repair or replace that item.