Pontiac GRAND AM 2004 Owner'S Manual Download Page 275

Page: 275 / 362

Taillamps, Turn Signal, and
Stoplamps

1. Disconnect the cargo net in the trunk.

2. Pull back the trunk trim.

3. Remove the four wing nut bolts which fasten the

taillamp lens to the vehicle.

4. Carefully remove the taillamps lens from the body

and avoid scratching the paint or dropping it.

5. Press the five tabs to release the plate from

the lamp.

6. Gently pull the bulb out from the socket.

7. Install a new bulb.

8. Reverse Steps 3 through 6 to reinstall the taillamp.

Replacement Bulbs

Exterior Lamp

Bulb Number

Back-Up Lamps

3156

Center High-Mounted Stoplamps

912

Parking/Turn Signal Lamps

3157NA or 3157A

Sidemarker Lamps

194NA

Stop/Taillamps

3157

Turn Signal Lamps

3156

For any bulb not listed contact your dealer.

5-49

Summary of Contents for GRAND AM 2004











































































































































































































































































































































































Search results

Summary of Contents for GRAND AM 2004

Reviews:

Brands by name

Popular brands

Pontiac GRAND AM 2004, Owner'S Manual

Search results

Summary of Contents for GRAND AM 2004

Reviews:

Brands by name

Popular brands