PNS630 Handheld Analyzer User Manual
14
4. Operations
4.1 Power on/ Power off
Press power button to power on or power off.
4.2 Main interface
There are 12 modules: SMV, GOOSE, Quick Test, Sequence, Time, Net Flow, IED,
Waveform, Optical Power, Network, MU Delay and SCD visualization.
Press navigator key to change between modules.
Main interface
SMV
: Receive SMV messages and display the analysis results in rms, waveform,
sequence, phase, power, phase-check, polarity, harmonic and real-time messages and
make a record on the drop-frame messages.
GOOSE
: Receive GOOSE messages and show the real-time value, bit-change,
message record, monitor and test GOOSE sending mechanism.
Quick Test:
Send SMV and GOOSE message, simulate MU to output IEC61850-9-2,
IEC60044-7/8(FT3), and GOOSE; Receive GOOSE or binary from test object to test the
relay test, MU or IED.
