7
0901712
Cables and connectors
Only use high-quality coaxial cables, which are terminated with F-connectors, as
well as high-quality single-mode fibre cables with FC/PC connections.
1
Optical input
4
Power supply connector 20 VDC
FC/PC-connector
5
SAT-IF outputs & TERR.
2
LED indicator for
of Quattro-back converter
operating voltage
6
Switch for RF output level
3
LED indicator for
output signal
Switch for RF output level (OPM-CDL)
Adjust RF output level if required using the switch located on top of the unit.
It is recommended to use Hi gain
(position “H”) for initial install.
The gain switch will adjust the output level in 5dB steps, Lo gain
(position “L”)
should only be used in extreme cases where satellites are not fully populated and
additional attenuation is required.
Remote power supply
The reverse converter is operated via the optional power supply OPM-CPS
(Polytron-No.: 9245532). Alternatively, the OPM-CDL return converter can be
operated via connected multiswitches.
Please observe the specific current consumption (see data sheet).
4
