45
8.11.3 EIT PID remapping
The submenu
EIT PID Remap Settings
allows remapping of an EIT PID (Event Information Table, Packet
Identifier). It is found in the menu item
Extras
.
Note:
These settings are only for the special case of a non-standard EIT PID.
Please select
OFF
for all other applications.
After pressing the button
EIT PID Remap Settings,
the following input window will be opened. Please change the
EIT PID only for special cases. To do this, change the
Mode
of the wanted channel to
ON
and enter the desired PID
in the column
Remap PID
. Press
Save
to apply the values.
8.11.4 Monitoring CI
Via the submenu
CI Monitoring,
a deactivation of the monitoring of the CI function is possible. It can be selected in
the menu item
Extras
.
Note:
These settings are only for the special case in which no CI monitoring is desired.
Please select
ON
for all other applications.
After pressing the button
CI Monitoring,
the following input window will be opened. For deactivation of CI monitoring
select
OFF
for the desired CI slot. Press
Save
to apply the selection.
