14
8.2.2 Input parameters for terrestrial range
TP > Frequency
BW > Channel bandwidth
The kind of input signal
will be identified automatically.
Enter input frequency
.
Select 7 or 8 MHz
PLP > Select service DVB-T2
Search > Searching
After pressing button
Search
the data is accepted
and the desired channel is set.
If the tuner locks on the
Select PLP value
transponder,
Tuner Locked
0
(only for DVB-T2)
is displayed in the upper field.
Reception conditions
The quality of the input signal can be evaluated by using the bit error rate
BER
and the
signal-to-noise ratio
SNR
.
These depend on the quality of the reception conditions and the signals.
Recommendation: Bit error rate
BER
should be ≤ 1e-6.
Required threshold value for the signal-to-noise ratio SNR is 26 dB for DVB-T and 32 dB
for DVB-T2.