Polytron FlashRip Instruction Manual Download Page 3

Page: 3 / 12

15 cm

Place the unit on a safe, stable and flate surface.

Do not obstruct the unit ventilation openings with paper, tablecloth, curtain,

etc. Place the unit approximately 15 cm away from other object.

Do not place any objects filled with liquid on or arroud the unit and keep it

away from splasing or dripping water.

Do not place any fire sources on or arround the unit, such as burning candle, match, etc.

Contact our service station when the unit does not work properly or

damaged. Do not try to repair by yourself.

Grip the AC Cord plug and do not pull the wire when you are connecting or

disconnecting the AC Cord. Unplug the AC Cord plug from kthe AC power

outlets if the unit is not operated for a long period of time.

SAFETY INSTRUCTION

Before operating the unit please follow these advise and instruction below for safe and correct operation.

Do not place the unit on any exteremely hot (near a heater or fire place), cold, humid or dusty

areas. Do not expose the unit under the direct sunlight. Place the unit at temperature from

C until 35

Safety Marking

CAUTION : To reduce the risk of electric shock, do not remove cover. No user-serviceable parts

inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instruction in the literature accompanying

the appliance.

The unit uses a component that produces laser beam and it have been classified as CLASS 1.

This marking is placed on the exterior of the bottom of the unit.

ENVIRONMENT INFORMATION : Please take attention to the local regulation for packaging,

battery and ex-unit disposal. The dispose of battery should be separated from common trash

as chemical disposal.

Condensation

Condensation might occur on the following condition : the unit is moved from a cold place to the warmer one,

the unit is operated inside a steamed room or a room with a high humidity, the unit is operated near an Air

Conditioner, soon after a room heater is turned ON. If there is a condensation inside the unit, it probably enable

to operate temporarily. In this case, wait about 1 until 2 hours to evaporate the moisture.

TROUBLESHOOTING

If the unit can not perform normally, follow the instruction below. If can not be finished or the failure there is

no on the

Problem

column, unplug the AC Cord and contact our after sales service near of your place.

Problem

There is no power indication
or no sound.
Output sound is not stereo.
Emitted sound is low.
Disc can not be played.

There is no picture on the
TV screen.

Picture distortion.

Bad radio reception or
reception contains noise.

Remote control is does not
work.

MIC does not work.

There is interference when
COAXIAL OUT cable
connected to the other
equipment.
USB Flashdisk or SD/MMC/
MS Card is undetected.

Causes

- AC Cord plug does not connected

properly to the power source.

- There is active karaoke function.
- Volume is in minimum condition.
- Disc is not compatible with the player.

- Disc is placed inversed.
- Disc is not put correctly.
- Disc is dirty.
- Disc is damaged or many scratch.
- Parental Lock function is active.
- AV Input setting is not appropriate

with used TV input terminal.

- Video cable is not firmly connected.
- Disc is dirty.
- Disc damaged or many scratch.
- Bad quality of video cable.

- DVD setup menu is incorrect.

- The antenna direction is not correct.

- There is interference from other the

near electric appliances.

- Battery polarity is incorrect or

inversed.

- Remote control is not directed to the

unit sensor on the front panel.

- Battery is exhaust.

- Microphone switch is in OFF position.
- If you use Wireless MIC, may be the

battery has exhaust.

- Maybe Microphone has damaged.
- There is signal interference from

COAXIAL OUT cable.

- Error or busy system.
- USB Flashdisk or SD/MMC/MS Card

does not connected or plug properly
to the USB terminal or Card Slot.

Solution

- Connect the AC Cord plug properly

to the power source.

- Matikan fungsi karaoke.
- Increase the Volume level.
- Use the disc/file format according

to the manual instruction.

- Insert the disc with label upside.
- Put the disc correctly.
- Clean up the disc.
- Use the undamaged disc.
- Deactivate the Parental Lock.
- Change the AV Input setting of

the TV.

- Connect the video cable properly.
- Clean up the disc.
- Use the undamaged disc.
- Use the video cable with a good

quality.

- Set the DVD setup menu according

to the manual instruction.

- Change the direction of the

antenna to get the best reception.

- Move away the unit from other

electric appliances.

- Insert the battery with the right

polarity.

- Point the remote control to the