LAB964R, Issue 4, May 2014
Page 5
2
Physical specification
Net weight 3.25kg
3
Installation
3.1
The following instructions are intended to help prevent hazards. Installation should only be carried out
by a qualified electrician and competent persons in clean, dry conditions where dust and humidity are
at minimum levels.
Note: we advise installers to fix all mains, switch and sensor wiring (in accordance with the latest
edition of the Wiring Regulations) prior to fixing the
CMX
appliance in position.
3.2
When accepting delivery of the
CMX
appliance, inspect for transit damage. If in doubt, call our
Customer Service team on 08443 715523.
3.3
The
CMX
appliance can be fitted directly to a ceiling, wall or suitable timber support (if loft mounting). It
can also be fitted within small ceiling voids and between joists above 400mm spacing.
3.4
Appropriate screw fixings to suit the support medium will need to be supplied by the installer. The
support plate is pre-drilled to suit 4 x 4mm (No.8) round/pan-head screws and flat washers.
3.5
Ensure that there is sufficient space for carrying out any future maintenance on the appliance.
