- 8 /18 -
MI01 Rev. 06 dated 08/11/2019
This document is the property of PolyKeg S.r.l. - Unauthorised copying and use is prohibited
USER MANUAL FOR
POLYKEG KEGS
6.INSTRUCTIONS FOR MANUAL FILLING OF KEGS WITH AND WITHOUT BAG
For the manual filling of the kegs, please use the PolyKeg
®
filling kit compatible with the keg valve (please
find the available filling kits list in section 14 of the user manual). In case of A and G type kegs with bag,
Micro Matic couplers are recommended.
6.1 PREPARATION
• Clean and sanitise all connection surfaces (Fig. 1), following
the instructions given in section 5 of the user manual.
• Assemble the filling kit as shown in Fig. 2.
• Secure the gas regulator connection
%
Fig. 2.
• Close the pressure top – up valve
#
and the product filling
valve
(
Fig. 2.
NOTE
For the K - valve coupler, open the red valve (Fig. 2 A).
• Close the counter – pressure regulator
^
Fig. 2.
• Connect the product tube
&
to the product filling connection
*
Fig. 3.
• Check that the gas pressure in the system does not rise above
the maximum value allowed as mentioned in section 2 of the
user manual.
• Connect the gas tube
!
as shown in Fig. 3.
NOTE
Use CO
2
or N
2
for Polykeg
®
without bag.
It is possible to use air for Polykeg
®
with bag.
• Purge product through the tube
&
to ensure no air is left in the
tube using product filling valve
(
Fig. 3.
• Proceed with the filling as per procedure 6.2.
!
Gas tube
@
Pressure top-up connection
#
Pressure top-up valve
$
Pressure gauge
%
Gas regulator connection
^
Counter-pressure regulator
&
Product tube
*
Product filling connection
(
Product filling valve
)
Keg coupler
Micro Matic is recommended.
@
!
#
$
^
*
&
(
)
Fig.1
%
Fig. 2 Manual filling kit
Fig. 2A KK coupler
Fig. 3
