OWNER’S MANUAL
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
Extended operating days and hours during peak season requirements.
7
FILTER PUMP MODEL
CP2000-C Filter System Pump
WATTAGE
360 Watts
AMPERAGE
3.0 Amps
ITEMS
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
PARTS NAME
Fitting Gasket
Suction Fitting
Suction Fitting Thrust Washer (SF Washer)
Fitting Lock Nut
Suction Fitting Cap (SF Cap)
Return Fitting
Return Fitting Diverter (RF Diverter)
RF Locking Ring
RF 90˚ Elbow
RF Nut
RF Gasket
RF Thrust Washer
ITEMS
QTY.
2
4
1
1
1
1
1
4
1
1
1
PARTS NAME
Hose
Hose Clamp
Filter Pump Assembly
Vent Screw
Vent Screw O-Ring
Seal Top
Canister Gasket
O-Ring (On Hose Connections)
Type A/C Filter Cartridge
GFCI Power Cord Set (Image Reference Only)
Return Fitting Plug (RF Plug)
1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your CP series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY on hand for lubricating the gaskets.
1. Installer shall follow written instructions provided for operation of the filter pump systems.
2. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) “Swimming Pools, Fountains and Similar
Installations” or its latest approved edition.
3. The Type A/C Filter Cartridge
21
will hold many as 6 of the 1” diameter chlorine tablets. Check your chlorine levels to determine the proper number of chlorine
tablets to add. The filter cartridge will automatically dispense chlorine into the pool as the Filter Pump runs. You must have the type of Filter Cartridge
21
with a
central core mesh divider (See page 8) to use the chlorine dispenser.
DO NOT use this to dispense powdered chlorine, shock treatment or any other type of chemicals as damage to the pump, filter cartridge, and pool will occur.
4. The CP Series Filter Pump systems are manufactured by Polygroup
®
and ETL control number 4000608 and 4006317 - double insulated and grounded - 120 Volts
A.C. - 60 Hz. (ALL Units must have a minimum of 105 Volts A.C. to start and run properly.)
FILTER PUMP POWER INFORMATION
PARTS LIST
PRELIMINARY STEPS
FILTER PUMP IMPORTANT NOTES
1
2
3
4
5
6
7
8
9