Polygroup LUMATIONS COLOR BLAST Owner'S Manual Download

Page: 3 / 4

OWNER′S MANUAL

EXTENDER KIT SETUP INSTRUCTIONS

2. Unlock the lock nut, and pull apart the plugs to reveal the male connector.

3. Save the power adapter for future use.

5. Locate the add-on connector of the second kit.

Open the protective cap to reveal the female connector.

7. Push the ground stake into the ground (soil/lawn) at your

desired spot.

4. Take the second kit out from the box, and insert ground stakes into

LED lights.

6. Connect the two kits together. Tighten the lock nut to secure the

connection.

1. Locate the extension cord and ground stakes of the first kit.

8. Plug it in to the wall outlet.

Ground Stake x 3

* You can use or remove the extension cord as you need

9. For best signal quality/reception, make sure the controller

is placed on a raised area free of obstacles.

TIP: Simply use the remote control to enjoy the

color spectacle. Please see REMOTE CONTROL

INSTRUCTIONS.

Summary of Contents for LUMATIONS COLOR BLAST

Page 1: ...erials not part of the product when in use 12 This product can be used by children ages 8 years and above and people with reduced physical sensory or mental capabilities if they have been given the ri...

Page 2: ...e with other Color Blast Type B LED Lights Simply calculate the Rated Wattage of all connected products and create your own light show IMPORTANT The total Rated Wattage of all connected products shoul...

Page 3: ...pot 4 Take the second kit out from the box and insert ground stakes into LED lights 6 Connect the two kits together Tighten the lock nut to secure the connection 1 Locate the extension cord and ground...

Page 4: ...Remove batteries when not used for an extended period of time or when depleted 5 Dispose of used batteries properly 6 Use only CR2032 batteries for the remote controller 7 Clean the battery contact s...