2
1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off
easily. Keep the tree holder filled with water. This item may be omitted if the product is not intended for placement on a tree or next to a tree.
2. If the product is placed on a tree, the tree should be well secured and stable. This item may be omitted if the product is not intended for placement on a tree or
next to a tree.
3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on
the product conductors, connections, and wires.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
USE & CARE INSTRUCTIONS
EXTENDER KIT SETUP INSTRUCTIONS
Mix-and-Match within the same series for Extra Fun!
This product is connectable with other Color Blast
™
Type B LED Lights. Simply calculate the Rated Wattage of all connected products and create your
own light show.
IMPORTANT:
The total Rated Wattage of all connected products should not exceed the Maximum Wattage Capacity of a single product.
SETUP INSTRUCTIONS
1. Understand your product.
2. Push the stakes into the ground (soil/lawn) at your desired spot and plug it in to the wall outlet.
Example:
(1) Max. Watt Capacity of Product A: 10W
(2) Rated Wattage of Product A: 2.9W
(3) Rated Wattage of Product B: 4W
Then a feasible connection can be:
A x 1 + B x 1
(2.9W) + (4W) = 6.9W
6.9W < 10W
Ground Stake x 3
2. Make sure connectors are fully inserted and any connector rings are twisted until completely secured such that the rings can no longer be turned
and the two portions of the connectors are completely assembled.
3. The lighting string is rated 4 Watts (0.8 Amps). Do not overload. Connect other COLOR BLAST™ remote controlled LED lights (Type B) end-to-end
up to a maximum of 10 Watts (2.0 Amps) total. To avoid the risk of fire or personal injury, do not exceed the maximum allowable electrical load.
Snowflake Pathway Marker LED Lights
Rated Wattage: 4W (0.8A), Total Wattage: 5.4 Watts
Maximum Wattage Capacity: 10W (2.0A)
AC Adapter
Input: 120V/60Hz, 0.16A
Output: DC 5V, 2A
Adapter
Extension cord
Controller
Add-on Connector
