Customer Services (858) 578-7887 & (888) GO IN
TEC
IN
TEC
Controls, 12700 Stowe Dr., Suite 1
0
0, Poway, CA 92064
Fax (858) 578-4633 & (888) FX IN
TEC
www.inteccontrols.com
Specification subject to change without notice.
Printed in USA 131119
Polygard® is a registered trademark of MSR
MGC2-20
PolyGard
®
Multi-Point Controller
User Manual - MGC2-20
Page 20
See 3.7.10
See 3.7.10
See 3.7.10
See 3.7.10
See 3.7.10
Controller address
(Reserved for future expansion; value should be left at “1”)
See 3.7.7
See 3.7.7
Siehe See 3.7.7
See 3.7.7
See 3.7.7
3.7.1 Service Mode
If the Service mode is set to (ON) then the stage/setpoints are disabled so relays are not activated during
calibration or service work. The service mode is Reset automatically after 60 minutes or when the service mode is
set to Off.
Symbol Description
Default
Status Function
Off
Service Mode Off
Off = Stages exceeded will activate the assigned relays
On = Stages exceeded will not activate the assigned relays
EP Module 1
active
EP Module 2
active
EP Module 3
active
EP Module 4
active
EP Module 5
Not active
Analog Output 1
Max.
Calibration AO 1
4.0=4 mA 20 = 20.0
Analog Output XX
Max.
Calibration AO XX
4.0=4 mA 20 = 20.0
GC- Address
1
Analog Output
