Norsk • vista-tec
Norsk • vista-tec
A Description and fi eld of application
Vista-Tec is an EN166:2001 certifi ed face shield for general purpose with increased robustness designed for
protection against non-specifi c mechanical hazards, in professional activities where there is risk of fl ying
fi ne particles, in the dental fi eld, in dental laboratory or other working environments that require similar
protection.
The face shields, made of polycarbonate, are resistant and do not yellow when exposed to light. They are
reusable and easy to clean (see Paragraph E).
Vista-Tec is comfortable and light, it can be worn comfortably for long periods as it does not create distortions
and visual fatigue, also ensuring a wide fi eld of vision.
The protective face shields are easily attached through the clips integrated into the frame.
Vista-Tec is stable on the head thanks to the adjustable headband.
It can be used with surgical masks.
This Personal Protective Equipment (PPE) is classifi ed, according to Annex I of EU Regulation 2016/425, as
Category II Protective Equipment.
B Composition
Frame Vista-Tec: Polyamide 12
Headband:
Silicone
Transparent protective shield: Polycarbonate
C Assembly
D Warnings
Vista-Tec DOES NOT protect against liquid splashes or sprays.
This PPE can only be used in dental, outpatient, hospital, laboratory or other professional contexts that require
similar protection where the user can directly evaluate the eff ectiveness against non-serious risks. The PPE
must not be used in case of risks that could lead to death or irreversible damage. In case of doubt regarding
the eff ectiveness against risks that are diffi
cult to assess, the user must NOT use the PPE.
This PPE is not designed to protect the user from violent impacts against any obstacles; if ophthalmic glasses
are worn, this PPE can transmit the impact.
The PPE does not protect from sunlight, UV radiation, laser and BLUE light (used in photopolymerization in the
dental fi eld). Do not expose the PPE to sunlight or UV lamps for long periods.
The materials constituting the PPE, in contact with the skin, can cause allergic reactions in people sensitive to
these types of materials (see Paragraph B).
The user is responsible for determining the suitability of the Vista-Tec for the intended use.
Avoid exposing the PPE to chemicals, fumes, vapors or heat sources.
Do not use solvents or organic liquids such as petrol in contact with the PPE.
Scratched or damaged shields must be replaced.
As reported in paragraph 10, point P, of the EN166:2001 standard, if protection from high speed particles at
extreme temperatures is required, the face shields must be marked with the letter T immediately after the
impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter T, the eye protector should only
be used as protection from high speed particles at room temperature.
E Indications for proper cleaning and maintenance
Cleaning
It is advisable to remove the shield from the frame for cleaning.
Protective face shields must be cleaned regularly after each use using warm water and neutral detergent. Use
soft microfi ber cloths to dry the components.
The polycarbonate shields are characterized by high optical performance, so please pay special attention when
cleaning. The presence of particulate matter can cause scratches on the shield.
Surface disinfaction of Vista-Tec frame and shield Vista-Tec can be carried out using alcohol-based products.
Never immerse the components completely in disinfectant solutions.
Please always refer to the disinfectant manufacturer’s instructions.
ATTENTION: Vista-Tec is not autoclavable.
Maintenance
The PPE is designed to be reused multiple times if kept in good condition.
It can be used for 3 years from its fi rst use.
Do not use the PPE if there are evident marks on the protective shields or if the frame is damaged.
Replace the damaged components if necessary.
F Information for storage and transport
Store in a clean and dry place, away from sunlight and in an environment free of organic vapors.
Vista-Tec must be transported and stored in its original packaging, at a temperature b5 °C and +30 °C.
5
Picture of the device correctly
assembled.
1
Remove the protective fi lm on both
sides by the corners X.
2
Insert the shield into the fi xing clip in
the opening provided and hook it to
the clip by sliding it up to the notch
as shown.
Gently press the fi nal part of the clip
into the notch until you hear a click.
Repeat the steps of Point 2 for fi xing
the other side of the shield.
3
Thread one end of the silicone strap
into opening 1.
Then thread it into opening 2.
Repeat the process for the other
end of the strap on the opposite
frame
arm.
4
Wear it and adjust the fi t by pulling
one strap end.
pull
and
click
2 1
2 1
1 2
2 1
X
X