PRSL Series IV Slushie Machine
E&OE
©2017 Polycool
2
Safety
Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or
equipment or property damage if not understood or followed. Safety messages have the following symbols:
You WILL be KILLED or
SERIOUSLY INJURED if you
do not follow instructions.
You CAN be KILLED or
SERIOUSLY INJURED if you
do not follow instructions.
You CAN be INJURED if you
do not follow instructions or
equipment damage may occur.
It is important that you read and
understand the instruction manual before
use and keep the manual in a safe place
for future reference. Safety information
presented here is generic in nature
–
some advice may not be applicable to
every piece of equipment.
All safety precautions must be observed
to reduce the risk of personal injury when
operating the equipment.
The term “equipment" refers to your
product, be it electrical mains, battery or
petrol engine powered.
IMPORTANT
– Handle the equipment
safely and carefully.
BEFORE USE
- If you are not familiar
with the safe operation/handling of this
equipment, or are in any way unsure of
any aspect of suitability or correct use it
for your application, you should complete
training conducted by a person or
organization qualified in safe use and
operation of this equipment.
•
Read all safety warnings and
instructions. Failure to follow
warnings and instructions may result
in electric shock, fire and/or serious
injury.
•
Do not operate the equipment in
flammable or explosive
environments, such as in the
presence of flammable liquids, gases
or dust.
•
Keep clear of moving parts.
•
This equipment may be a potential
source of electric shock if misused.
•
Do not operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
•
When using the equipment, basic
safety precautions detailed here
must always be followed to reduce
the risk of fire, electric shock,
personal injury and material damage.
•
When wiring electrically powered
equipment, follow all electrical and
safety codes.
•
Ensure all power sources conform to
equipment voltage requirements and
are disconnected before connecting
equipment.
•
The equipment must be plugged into
a standard, earthed mains electrical
outlet. Do not plug into double
adaptors or multi-outlet extension
power boards.
•
Children should be under adult
supervision whilst using the
machine.
Personal Safety
Keep packaging away from children - risk
of suffocation! Operators must use the
equipment correctly. When using the
equipment, consider conditions and pay
due care to persons and property.
Prevent unintentional starting of the
equipment - ensure equipment and power
source switches are in the OFF position
before connecting or moving the
equipment. Do not carry equipment with
hands/fingers touching any controls.
Remove any tools or other items that are
not a part of the equipment from it before
starting or switching on.
General Equipment Use and Care
Do not force the equipment. Use the
correct equipment for your application.
The correct equipment will perform better
and be safer within its design parameters.
Do not use the equipment if the ON/OFF
switch malfunctions
– any equipment that
cannot be controlled with the ON/OFF
switch is dangerous and must be
repaired.
General Service Information
•
Have the equipment serviced or
repaired at authorized service
centers by qualified personnel only.
•
Replacement parts must be original
equipment manufacturer (OEM) to
help ensure that equipment safety is
maintained.
•
Do not attempt any maintenance or
repair work not described in this
instruction manual.
•
After use, the equipment and
components may still be hot
– allow
the equipment to cool and
disconnect spark plugs and/or
electrical power sources and/or
batteries from it before making
adjustments, changing accessories
or performing repair or maintenance.
•
Do not make adjustments while the
equipment is running.
•
Perform all service related activities
under suitable conditions, such as a
workshop etc.
•
Replace any worn, damaged or
missing warning labels immediately.
•
Do not clean equipment with
solvents, flammable liquids or harsh
abrasives.
Slushie Machine Use and Care
WARNINGS
•
Use only potable (drinkable) water in
the machine.
•
Do not place body parts or any
object other than the recommended
liquids into the drink tanks while the
machine is running.
•
Use only recommended liquids and
at the correct mixture ratio in the
drink tanks. Failure to follow to this
warning can result in serious
personal injury, death and/or
property damage.
•
Do not operate the machine without
liquid in the drink tanks.
•
Operate the machine on solid, level
surfaces only.
•
At least 30cm (12”) free space
around the machine is required to
prevent machine overheating.
•
Do not operate the machine in direct
sunlight or near heat generating
equipment.
Always clean all machine components
that come into contact with the drink
mixture thoroughly with food grade
disinfectant or mild detergent and warm
water. This must be done:
•
Before first use.
•
Weekly whilst the machine is in use.
•
Before placing the machine into
storage.
•
When commissioning the machine
after being in storage.
If an ice crust forms on the surface of
liquid in the drink tanks when the beater
(auger or spiral) has been off for an
extended period, it should be removed
before turning on the mixer.
Failure to follow the recommended
maintenance schedule may lead to
conditions or damage that will void any
product warranty.
