found at the back of the phone.
Click on the Save button.
■
Registering phone
This chapter describes how to register Polycom phone using DHCP, TFTP, HTTP & HTTPS.
The following topics are covered:
DHCP
■
TFTP or HTTP & HTTPS
■
DHCP
Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
■
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has been
■
initiated by user. DHCP server will instruct the phone where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your phone to PBXware. Dial *123 to verify registration.
TFTP or HTTP & HTTPS
Network Configuration
If there is no DHCP in your network, you can still auto provision your Polycom phone. Please
refer to your Polycom phone model User Guide for instruction about setting static IP address.
After you configure your Polycom phone to use a static IP address, continue with the following
steps.
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
■
You will be prompt to Enter username and password and press Submit button.
NOTE:
■
Factory default login details are username: admin and password: 456.
Click on Settings tab.
■
Click on Provisioning Server link under the Settings tab .
■
Choose what server type you intend to use: HTTP, HTTPS or Trivial FTP.
NOTE:
Our
■
recommendation is to use the HTTP.
If you choose to use server type HTTP or HTTPS enter http:// or https:// followed
by Hostname or IP Address, followed then by /prov.
