background image

SpectraLink Corporation 

Link Wireless Telephones and Accessories User Guide 

Part Number: 72-0075-09-C.doc 

Page 20 

Other Medical Devices 

If you use any other personal medical device, consult the manufacturer of your device to determine if it is 
adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this 

information.  

Use While Driving 

Campus installations and warehouse facilities that use vehicles such as forklifts or golf carts should abide by 

these guidelines when using wireless telephones: 

 

Give full attention to driving and to the road, aisle, or path. 

 

Use hands-free operation, if available. 

 

Pull off the road, aisle, or path and park before making or answering a call.  

For Vehicles Equipped with an Airbag 

Do not place a portable handset in the area over the airbag or in the airbag deployment area. An airbag inflates 
with great force. If a handset is placed in the airbag deployment area and the airbag inflates, the handset may be 

propelled with great force and cause serious injury to occupants of the vehicle.  

Additional Safety Information for Wireless Telephones 

 

It is recommended that standard acceptance procedures be followed prior to operating this equipment in 
proximity of life-support systems. 

 

To minimize risk of interference, pacemaker users should not carry the wireless telephone next to the 
pacemaker. 

 

Earpiece may retain magnetic objects. 

 

Operation of the wireless telephone may produce an audible noise noticeable to hearing aid users. It is 
recommended that a hearing aid compatible headset be used by hearing aid users.  

 

Handset Operation Normal Position 
Hold the handset as you would any other telephone, with the earpiece to your ear 
and speak into the microphone. The internal antenna is then positioned properly. 

Chargers and Battery Packs 

 

It is normal for the Battery Pack to become warm when charging. 

 

Chargers are only authorized for use in the U.S. and Canada. The correct power supply for your charger 

will be provided with the charger.  

 

Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to freezing 

temperatures or direct sunlight. 

 

Do not place anything in the charger other than the handset or single Battery Pack as appropriate as the 

contacts could be bent. Bent contacts can keep the Battery Pack from charging. 

 

Only use SpectraLink Battery Packs with Spectra-Link chargers. 

 

Never use non-SpectraLink charging units as they could damage the Battery Pack.1 

 

Only use the original plug-in power adapter for the chargers. 

 

Contact your service representative for assistance if you have a faulty Battery Pack or a problem with your 

charger. 

 

Replacement Battery Packs are available from your supplier or servicing agent. 

                                                      

1

 

If you have been issued a charger that carries another brand, please check with your phone system administrator for directions on 

how to properly use it. 

Summary of Contents for SpectraLink BC4900


























Reviews: