User Guide for the SoundPoint IP 32x/33x Desktop Phone
2 - 10
5.
Press
to enter a first name.
Entry to this field is alphabetic as denoted by
.
6.
Enter the first name of the contact from the dial pad.
7.
Press the
Ok
or
Cancel
soft keys to accept or cancel changes.
8.
Press
to display the next field in the contact’s entry.
9.
Repeat steps 4 to 8 to enter the last name of the contact.
10.
Repeat steps 4 to 8 to enter a contact number.
This is a required field and it must be unique (not already in the directory).
Entry to this field is number as denoted by
.
11.
Repeat steps 4 to 8 to change the Speed Dial Index if desired.
It is automatically assigned to the next available index value.
For more information, refer to
Assigning Speed Dial Indexes
on page
3-14
.
12.
Repeat steps 4 to 8 to change the Ring Type and Divert Contact if desired.
These fields may be left blank.
For more information on setting the Ring Type field, refer to
Distinguishing Calls
on page
2-17
.
For more information on diverting contacts, refer to
Diverting Calls
on
page
2-18
.
13.
Repeat steps 4 to 8 to change the Auto Reject, Auto Divert, Watch Buddy,
and Block Buddy if desired.
Use
,
,
, or
to switch between Enabled and Disabled
settings.
For more information on setting the Auto Reject field, refer to
Rejecting
Calls
on page
2-17
.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
