Polycom SoundPoint IP 200W Provisioning And Configuration Manual Download Page 24 | Manualshive

Page: 24 / 64

background image

Provisioning and Configuration Guide SoundPoint IP 200W

3 - 12

For example, a SoundPoint IP 200W gateway with 3 handsets will take:

Gateway = 5 minutes
Handset 1 = 12 minutes
Handset 2 = 12 minutes
Handset 3 = 12 minutes
Total Upgrade time = 41 minutes

Handsets are upgraded serially at a speed of 24Kbps. Gateway firmware size

is approximately 925Kb and handset firmware size is approximately 794Kb.

Schedule upgrades at off-peak hours to avoid user downtime during long

upgrade times.

Firmware Files

A firmware version consists of a handset and a gateway file. There are:

•

Handset file—

PerePP_<language>_<ver-info>.fwu

For example,

PerePP_fr01_v0790.fwu

•

Gateway file:

PereGw_<language>_<ver-info>.fwu

For example,

PereGw_fr01_v0790.fwu

Release information and address information is published in a text file

dirlist.txt

, which must be placed in the same folder as the firmware files.

By default, the phone requests its firmware files from

<ROOT></Updates>/

.

For example, the folders could be

E:\TFTP-Root\Data\Updates\

E:\TFTP-Root\Data\Updates\UserGroup1\

For example, the folder content could be

DirList.txt

PereGw_fr01_v0790.fwu

PerePP_fr01_v0790.fwu

Note

You may not see an English file in the list of firmware files. English is embedded in
every language file so that it is easy to switch back to without loading new firmware.
The German file is loaded by default.

Note

If you are using a TFTP server, your file path may require a leading forward slash.
Enable logging on your TFTP server so you can determine this easily. Some TFTP
servers have a file path limit of 32 characters. In this case, you will have to ensure
your path name stays within those limits.

«
...
22
23
24
25
26
...
»

Summary of Contents for SoundPoint IP 200W

































































Reviews:

No comments

Related manuals for SoundPoint IP 200W

Brand: GE Pages: 2

Brand: Panasonic Pages: 268

Brand: T-Home Pages: 52

Brand: Orchid Telecom Pages: 25

Brand: Gigaset Pages: 86

Brand: Southwestern Bell Pages: 24

Brand: VTech Pages: 46

Brand: Radio Shack Pages: 28

Brand: BELGACOM Pages: 37

Brand: VTech Pages: 51

Brand: GE Pages: 2

Brand: GE Pages: 96

Brand: GE Pages: 1

Brand: Cisco Pages: 202

Brand: Aastra Pages: 8

Brand: GAI-Tronics Pages: 36

Brand: Viking Pages: 8

Brand: Worx Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands