Polycom® RealPresence® Group Convene
TM
Wall Mount Setup Sheet Supplement
2
4
Attach the wall mount plate using the recommended wall
mounting hardware appropriate for your room wall.
Install the wall mount arm bracket
using the two screws (supplied
for mounting the stand to the
display.
Wall Mount Arm Bracket
1342-71937-001
Refer to Step 1 in the
Polycom RealPresence Group Convene
Setup Sheet
.
6
Fasten the wall mount arm bracket to the wall mount plate using two
thumb screws. You may have to wiggle the bracket to get the screw
to line up with the hole.
(2) M4 x 8 Knurled
Thumb Screw
1601-71937-001
Follow the instructions in the
Polycom RealPresence Group Convene
Setup Sheet
to install the camera, prepare the codec, connect cables and
install the codec.
Route and manage the cables within the display as needed.
Install the rear cover as shown in the
Polycom RealPresence Group
Convene
Setup Sheet
.
Connect power and power on the system as shown in the
Polycom
RealPresence Group Convene Setup Sheet
.
Wall Mount Plate
1343-71937-001
3
B
5
Slide the wall mount arm bracket into the wall mount plate.
