The RMX 4000 must rest on the four feet at the base of the MCU and must be shifted or moved into
position using the two handles attached to the front.
To install the 4000 as a standalone system:
Procedure
» Place 4000 on a hard and flat surface or desktop.
Mounting the RealPresence Collaboration Server (RMX) 4000 in a
Rack
Perform the following steps to mount the RealPresence Collaboration Server (RMX) 4000 in a Rack.
Rack Mount Preparations
• Depending on the rack installed in your site, you may need to remove the handles if they are
attached to the RealPresence Collaboration Server (RMX) 4000.
• If the opening in the rack that is allocated to the RealPresence Collaboration Server (RMX) 4000 is
exactly 6U, the feet must be removed from the RealPresence Collaboration Server (RMX) 4000 to
install it in the rack.
Optional feet and handle removal
Mounting the RealPresence Collaboration Server (RMX) 2000/4000 in a 19” Rack
There are two methods for installing the RealPresence Collaboration Server 2000/4000 in a 19” rack:
•
Using the rack rail runners on the rack
◦ Install the telescopic rail runners.
◦ Mount the RealPresence Collaboration Server on top of the rail runners.
◦ Fasten the RealPresence Collaboration Server to the rack spacers using the flat head screw
(item 8) with flat washer
(item 9) through the two holes in the RealPresence
Collaboration Server front mounting brackets.
Appliance Edition Installation
Polycom, Inc.
24
