background image

Introduction to KIRK Wireless Server 300

2–3

KIRK Repeater

The repeater can be used to extend the coverage area in a wireless solution. 

Depending on the repeater type, it can be mounted either on the wall or on the 

ceiling. The wireless repeater is used in areas with limited voice traffic, where 

cabling is difficult. The repeater does not increase the number of traffic 

channels, but increases the coverage area established with the base station. The 

use of repeaters is optional.

KIRK Handset

The handset is a lightweight, ergonomically designed wireless unit that 

includes an LCD display and keypad. It is a portable unit compatible with 

DECT GAP standard, and it is designed to provide the subscriber with most of 

the features available for a wired phone, in addition to its roaming and hand 

over capabilities.
The KWS300 supports up to 12 registered handsets.

Auto Login and Handover

Auto login 

refers to the ability to log on to more than one system, enabling you 

to use the same handset on up to 10 different systems.Auto Login type B is 

used if a handset is subscribed to two systems only. Auto Login B can be used 

in separate systems which are overlapping each other.

KIRK SIO Application Interface

The SIO Application Interface is a communication platform allowing text 

messaging between the wireless server and a handset. With the SIO API, 
which is a fundamental part of all our solutions and a third party application 

program, the customer is offered a wide range of usage opportunities in a 

variety of vertical markets. For more information about this feature, please 

download the 

KIRK SIO Application Interface

 brochure at www.polycom.com.

KIRK Maintenance Software

The following software application for the installation and maintenance of the 

KWS300 Solution is provided:

ServiceTool. The service tool is used for programming the repeater, 

adjustment of the handset and software download to repeater/handset.

The ServiceTool application can be downloaded at www.polycom.com.

Note

The ServiceTool is not used for adjustment of the KIRK 50xx Handsets.

Summary of Contents for KIRK 300





























































Reviews: